Hi Sandy,

We were looking at our compatibility chart, and don't see where the Janome MB7 is listed as compatible with the Quick Snap GH1. So we think this might be an error on our website, that the MB7 is listed as compatible. I would recommend that you contact DIME about the adapter, since we're not super familiar with that either. DIME is the manufacturer so they would know more. You can also check with them as to if your machine is for sure compatible to the GH1. You can reach them at 888-739-0555 or [email protected]. Have a great day!

Thank you for your response Jeanne. I am in Australia so have emailed DIME customer service as you suggested.

You're welcome! They are opened 8 - 5 pm Central Standard Time. So they closed about an hour ago. But they should respond on Monday. Have a good weekend!

I am assuming it would be the same situation with the Quick Snap GH3 hoop too.

Yes, it's the same situation for the Quick Snap GH3 hoop too. Hopefully you were able to contact DIME and have figured it out.

Hi Sandra,

Thanks for reaching out to embroidery.com! If you are using Embrilliance software, then you can shrink down the size of the design. Also, if you have the software then you can split the design into 2 files or more. Please let us know if you have any other questions. Have a great day!

Yes, that is correct, Latricia.

~Heather

Hi, MJ. Thanks for the question. It looks like DIME has had some updates and there IS a 200x360 hoop available for your machine, which should be comparable to the 200x350 hoop you've been using (size wise). We've now updated our website accordingly. Here's a link to the hoop in question, which if I haven't been clear, IS recommended for your machine:

https://www.embroidery.com/product.ec?productID=379592

We hope this helps. Please let us know if you have any questions.

~Heather
[email protected]

Hi, Kim,

Thank you for reaching out with your question. The Quick Snap is the largest hoop that the MB-7 and MB-4 can accept. Though the hoop will fit on your machine, please note that the sewing area is likely smaller than the size of the hoop. Just be sure that the designs you choose are smaller than the sewing area of your machine, and you should be good to go. I hope this helps. Please let me know if you have any questions, and have a great day!

~Leah L.
[email protected]

No, it does not, Susan, but there are several similar hoops, the Multi Needle Monster, which are compatible with the Brother PR1050x. Here's a link to a list of compatbile hoops:

https://www.embroidery.com/embroiderymachine.ec?EMID=740&efid=1245

~Heather
[email protected]

Hi, Donna. Thanks for the question. Which embroidery machine do you have?

Thanks,

~Heather
[email protected]

I'm sorry, Betty, but they cannot. The Snap Hoop Monster products are strictly for use with particular embroidery machines. Thanks for the question.

~Heather
[email protected]

Thanks so much for the feedback, Susan. I'm very glad you are happy with your purchases.

~Heather
[email protected]