I've used this product recently. It adheres quickly and well when pressed. The shiny side of the fusible mesh faces the wrong side of your fabric. If your hot iron touches the shiny side of the nylon mesh, it will stick to your iron, and the iron will need to be cleaned.

The instuctions are vague they only say the iron is not to touch the stablizer only the fabric Do I put the stabilizer on the inside of the shirt and then pres on the outside

I've used this product recently. It adheres quickly and well when pressed. I do recommend a pressing cloth when pressing from the stabilizer side.

Hi, Karen. I believe the shiny side faces the wrong side of the fabric,Karen, as it is the side with the fusible coating. Be sure to use a pressing cloth or, as you indicated, press from the outside.

Please let me know if you need further questions.

~Hather
[email protected]