Inside the Hoop with Kimberbell -- Rope Bowls!
Watch:
Positioning Designs Using the Sewing Revolution 5/7
The Sewing Revolution can be used to position machine embroidery within many shapes including circles, squares, hexagons etc. This tutorial illustrates using the Sewing Revolution 5/7 to precisely position an embroidery design on fabric. You can use this tutorial to learn how to position up to seven designs in a circle.
1:
Print an actual sized production sheet for the embroidery design you are placing. Cut the design out. Place The Sewing Revolution over the embroidery design template you have just made.
2:
Move the Sewing Revolution until the two yellow lines touch each side of the design.
3:
Take note of the measurement on The Sewing Revolution at the middle point of the design template.
4:
Once this is established, place The Sewing Revolution on the fabric and mark a dot at the center point.
5:
Also mark a dot at your central measurement on the yellow lines.
6:
Mark a dot 1" below this point.
7:
Lastly, mark a dot 1" above the point marked in step 5.
8:
Now on each yellow line there are 3 dots 1 inch apart.
9:
Position the fabric using these 3 dots to center the design. If you would like to mark 7 design lines in a circle, repeat above steps using the blue lines instead of the yellow lines.