Embroidery Central Logo
(0)
BBB Accredited Business

(435) 755-0486

© 2021 Embroidery Central

What comes with the Snap Hoops?

further details in this video:



Sharon T.

I have the largest Snap Monster Hoop. 260 x 400 mm. Are you familiar with Edge to Edge Quilting with Amelie Scott Designs? Hope you can help me. The largest design she has should fit into my hoop but for some reason the design won’t embroider the entire pattern. If I reduce the design to 88 % then it will work. There is plenty of room to the left of the hoop but I can’t get it to work properly. I have a Bernina 770 QE. I’ve tried to move the design but run into the problem of the design not fitting. Any help would be so wonderful. I’d like to utilize the full entire design size.

Please Login to comment on this post.

Kirsten S.

Hi Sharon,

I'm not familiar with Edge to Edge Quilting. I do know that embroidery machines cannot fit designs that look like they should fit. Our hoops have margins, kind of like the printable area on paper when we print things. If the design is exactly as big as the hoop, that's why it won't fit. Many hoop margins are about an inch on all sides, but it varies. This is a link to a blog post explaining that https://www.embroidery.com/SewingArea.ec?efid=4242


You can use software, such as Embrilliance software to use multi-position or multiple hoopings to use the full size of the design. I don't personally find that especially simple (I also don't do it very often), but I hear once you get the hang of it, you never go back. Here's a blog post about that. https://www.embroidery.com/multi-position-hooping....

Please Login to comment on this post.

Heather B.

I don't know how to resolve the issue you are having but I'd suggest contacting Designs in Machine Embroidery for help, since you are trying to do this project in your Snap Hoop Monster. They can be contacted at the following number: 888-739-0555.

~Heather
info@embroidery.com

Please Login to comment on this post.

Eleanor U.

are any of these compatible with the Janome MC500e?

Please Login to comment on this post.

Heather B.

Yes, there are three sizes available for the Janome MC 500e, Eleanor. You'll find them listed on the MC 500E's page here at Embroidery.com:

https://www.embroidery.com/Janome-MC500E.ec?efid=1245

I hope this helps!

~Heather
info@embroidery.com

Please Login to comment on this post.

Caryelee G.

There doesn't seem to be an explanation of just what a Snap Hoop ADAPTER? Which do I need for my first Snap Hoop? As far as I can see, there is no explanation of this ADAPTER? I need to get my hoop ASAP.

Please Login to comment on this post.

Heather B.

Hi, Caryelee. Thanks for the good question. The adapter is a converter that is needed if you have a machine with arms.

If you need help deciding which hoop to pick for your machine, I recommend looking up your machine in our Machine Embroidery Database. Once you've clicked on your machine, you'll see which hoops are recommended for you.

Machine Embroidery Database Link:
https://www.embroidery.com/Embroidery-Machines.ec

Please let us know if you have further questions.

~Heather
info@embroidery.com

Please Login to comment on this post.

Jo M.

Does this hoop have software like the large one?

Please Login to comment on this post.

Heather B.

Hi, Jo. As far as I know there is no software included or required with any of the Snap Hoops. If you were thinking of a different software, please clarify. Thanks,

~Heather
info@embroidery.com

Please Login to comment on this post.
Please Login to comment on this post.