Thanks for the feedback, Terri.
~Heather
[email protected]
Downloadable Item(s)
Can be immediately downloaded.
Thanks for the feedback, Terri.
~Heather
[email protected]
I just finished this design using my multi hoop and I have embrilliance software. It came out AWESOME!!! True I had to jump thru some hoops
due to I do not have a 6x10 ( only a 5x7) but it came out perfect.
Wow, beautiful job, Vanessa! Congrats on a job well done and on figuring out how to make this project work in your 5x7 hoop.
~Heather
[email protected]
When PJ recommends dense fleece batting, would she share which product she uses? I used Bosal in R for her tree, and am wondering if that will leave this design with to much extra textur
Hi, Judy. Jackie from PJ Designs specifies in her tutorial that she used Pellon Thermolan Plus. If the "Bosal in R" is a similar product, it should be fine. From a quick online search, my eye says they appear to have a similiar thickness.
~Heather
[email protected]
Gotcha, Judy. Looks to me it looks like it should work. You might try one of the smaller pieces (such as one of the boots) and see if you're happy with the results.
~Heather
[email protected]
Are the jump rings you used to hook the pieces together in the witchy welcome project 15mm. If so they are no longer available at JoAnn's do you have other suggestions where they might be found? are they open rings. I see some that say open and some that don't. Thanks for your hel
Hi Judy! I'm PJ (Jackie) the designer of the pack. Heather from embroidery.com asked me to jump in, so here I am (o; I am attaching (hopefully!) a close-up of the package of jump rings. They are definitely 15mm and they are split so you can bend them to fit into the design eyelets. Not sure where you should go, although I have a Hobby Lobby near me, so that would be my first stop after Joann's. However, I just did a search on the Joann website, and here is a link to the rings: http://www.joann.com/aluminum-jump-ring-15mm-90-pc... Hope this helps! Jackie
I assume this will fit and work with my Baby Lock elegant
Thanks, for the question, Verna. Yes, the "Witchy Welcome" set is recommended for use with your Babylock Ellegante.
~Heather
[email protected]
do you get all the formats? I have different machines
Hi, Joe. Thanks for the question. You get your choice of any or all of the formats listed above.
Sincerely,
~Heather
[email protected]
Where did you get the material for the shoes and the behind the sign? Do you sell it?
Hi Linda, this is PJ (Jackie), the designer of the pack. Thank you for writing! Heather from embroidery.com asked me to jump in here (o; You will not be happy with my answer, I'm afraid. I could no more tell you where I bought the fabric if you offered me a million dollars! I have a sinfully large stash of fabric that I rummage through when I am doing my samples. But I can tell you that I typically buy from a local fabric shop (not a chain) that carries lots of fabrics from the big companies. They are all sending the various fabric stores their fall and holiday collections, so if you have access to one, this is a great time to buy. Sorry I can't be of more help.
Is it OK to change the wording on the sign? Also, will the design work with the Viking mega hoop (embroidery field 5.91x14.17)? Thanks.
It is definitely OK to change the wording on the sign.
I looked at all the sizes for the individual pieces, and YES, this will fit in with the 5.9" x 14" hoop with no problem.
I am totally tempted to try the multi-position feature of Embrilliance Essentials on it, though!
Hi Pam, I'm sorry, but I would not recommend sizing these designs down by that much.
~Heather
[email protected]
can I use this on my baby lock ellure machin
I'm sorry, Susan, but I would not recommend this design pack for your Babylock Ellure.
Can I do this with my Mega Hoop or 5x7 hoop for my Bernina 730.
Hi Sandy, and thanks for the question. Most of these designs will not work it your 5x7 hoop, but should work in your Bernina's Mega Hoop. ~Heather
I don't see the band and bow pattern. Please give me a clue.
Thank you
There will be three files listed under the hat : "PJ731a, PJ731b, and PJ731c." Make sure to download all three and you should have what you need. I hope that helps!
Right u are. Thanks for answering so promptly.
Is this a kit including fabric? or just the designs?
Is just the downloadable designs, Patricia. You can pick out the fabric of your choice from your stash or from your local fabric shop(s).
Terri S.
Note that it will not fit in the Viking 6x10 hoop (150x240).